Available lengths: 1ft, 2ft, 3ft, 5ft, 10ft, 15ft, 20ft, 25ft, 35ft, 50ft, 75ft and 100ft
Our CM.P mic cables are hand-built by skilled technicians in our facility in China. Only the finest available materials and most effective techniques are used. Every detail - the cable construction, the connector choice, the solder, the flux, the shrink tube, the testing, and the packaging, are each carefully chosen to create great stage and touring microphone cable available.
FEATURES
-
Male connector with improved locking recess without "window", more stringent housing increases durability
-
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
-
Boot with polyurethane gland gives high protection to cable bending stresses
-
Sleek and ergonomic design - valuable and handy
-
Rugged zinc die cast shell, long lasting and dependable
-
Internal thread on shell is well protected against any damage
CABLE CONSTRUCTION
The CM.P cable is designed from the inside out to be the finest stage and tour grade cable available. Every component of the cable itself is carefully chosen with the end goal of creating a tough, flexible, and dead-quiet microphone cable. It’s not an ordinary cable. Here’s a closer look:
Inner Conductors
The two primary stranded inner conductors each have 20 strands of 0.12 bare copper. While many cable companies will lower cost by using inferior materials here (like aluminum with a copper coating), ours is high quality, from the inside out.
Inner Conductor Insulators
The insulator that was chosen to separate the two inner conductor cores is Polyethylene. We weren’t trying to build the world’s cheapest cable, we set out to build cables among the best.
Shielding
Provides Immunity from outside EMI and RF interference. If your stage has wireless sources or electricity, this is critical.
Soft Cotton Stranded Filler
To create the soft, pleasing feel of the CM.P cable, we chose a natural cotton filler to round out the interior of the cable. It feels right, coils the way you want it to, and is pleasant to handle.
Helical Bare Copper Shield
The primary helical shield is provided by 80 strands of 0.1 the highest quality bare copper. It’s soft, flexible, and effective in shielding from EMI and RF noise. With the combination of this quality mesh shield plus the two conductive PE coatings on the inner conductors, the CM.P is the perfect cable for today’s active and noisy stages. The sounds and signals you want to stay inside are contained, and the noise and interference that you want to keep out is reflected away from your precious audio.
Outer Jacket
The outer jacket of the CM.P2 cable is opaque black PVC with an outside diameter of 6.5mm. PVC is the perfect material for this application because it holds its shape well and has great abrasion resistance. It’s easy to clean and comfortable to coil.
CONNECTORS
CM.P cables are hand terminated with quality CA.XXn series connectors. Our standard is the black connectors with silver contacts. The CA.XXn series is the next generation of the worldwide accepted standard of XLR cable connectors and offers several features which make it more reliable, easier to assemble and improves contact integrity as well as cable strain relief.
Warranty - Lifetime
Reilly SR LLC – Creative Audio Technology – provides a full lifetime warranty on this product against faulty materials or workmanship. Coverage DOES NOT extend to physical damages incurred after delivery, damage caused by failing to follow the guidelines in the instruction guide,or damage caused by any attempt to repair the item by third parties. We will repair or replace items at our discretion.
Creative Audio
(M1) CM.P Mic Cable - Stage Flexible - Black - 1ft to 100ft (Cable Microphone by Creative Audio)
- Regular price
- $ 10.99
- Sale price
- $ 6.99
Available lengths: 1ft, 2ft, 3ft, 5ft, 10ft, 15ft, 20ft, 25ft, 35ft, 50ft, 75ft and 100ft
Our CM.P mic cables are hand-built by skilled technicians in our facility in China. Only the finest available materials and most effective techniques are used. Every detail - the cable construction, the connector choice, the solder, the flux, the shrink tube, the testing, and the packaging, are each carefully chosen to create great stage and touring microphone cable available.
FEATURES
-
Male connector with improved locking recess without "window", more stringent housing increases durability
-
Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
-
Boot with polyurethane gland gives high protection to cable bending stresses
-
Sleek and ergonomic design - valuable and handy
-
Rugged zinc die cast shell, long lasting and dependable
-
Internal thread on shell is well protected against any damage
CABLE CONSTRUCTION
The CM.P cable is designed from the inside out to be the finest stage and tour grade cable available. Every component of the cable itself is carefully chosen with the end goal of creating a tough, flexible, and dead-quiet microphone cable. It’s not an ordinary cable. Here’s a closer look:
Inner Conductors
The two primary stranded inner conductors each have 20 strands of 0.12 bare copper. While many cable companies will lower cost by using inferior materials here (like aluminum with a copper coating), ours is high quality, from the inside out.
Inner Conductor Insulators
The insulator that was chosen to separate the two inner conductor cores is Polyethylene. We weren’t trying to build the world’s cheapest cable, we set out to build cables among the best.
Shielding
Provides Immunity from outside EMI and RF interference. If your stage has wireless sources or electricity, this is critical.
Soft Cotton Stranded Filler
To create the soft, pleasing feel of the CM.P cable, we chose a natural cotton filler to round out the interior of the cable. It feels right, coils the way you want it to, and is pleasant to handle.
Helical Bare Copper Shield
The primary helical shield is provided by 80 strands of 0.1 the highest quality bare copper. It’s soft, flexible, and effective in shielding from EMI and RF noise. With the combination of this quality mesh shield plus the two conductive PE coatings on the inner conductors, the CM.P is the perfect cable for today’s active and noisy stages. The sounds and signals you want to stay inside are contained, and the noise and interference that you want to keep out is reflected away from your precious audio.
Outer Jacket
The outer jacket of the CM.P2 cable is opaque black PVC with an outside diameter of 6.5mm. PVC is the perfect material for this application because it holds its shape well and has great abrasion resistance. It’s easy to clean and comfortable to coil.
CONNECTORS
CM.P cables are hand terminated with quality CA.XXn series connectors. Our standard is the black connectors with silver contacts. The CA.XXn series is the next generation of the worldwide accepted standard of XLR cable connectors and offers several features which make it more reliable, easier to assemble and improves contact integrity as well as cable strain relief.
Warranty - Lifetime
Reilly SR LLC – Creative Audio Technology – provides a full lifetime warranty on this product against faulty materials or workmanship. Coverage DOES NOT extend to physical damages incurred after delivery, damage caused by failing to follow the guidelines in the instruction guide,or damage caused by any attempt to repair the item by third parties. We will repair or replace items at our discretion.
- Regular price
- $ 10.99
- Sale price
- $ 6.99
Frequently Bought Together
-
Vendor: Rack'D
(C41) .8ch Rack'd Show Ready SLXD Shure 8 Channel Ready to Use Wireless System - 2 paddle antennas in an SKB Rack
Regular price From $ 11,699.00 -
Vendor: Rack'D
(C41) .8ch Rack'd Performance BLX Shure 8 Channel Ready to Use Wireless System - just 2 antennas in an SKB Rack in a Case
Regular price From $ 6,499.00 -
Vendor: Rack'D
(C41) .8ch Rack'd Performance QLXD Shure 8 Channel Ready to Use Wireless System - just 2 antennas in an SKB Rack in a Case
Sale price $ 12,399.00Regular price $ 13,500.00 -
Vendor: Rack'D
(C41) .8ch Rack'd Performance SLXD Shure 8 Channel Ready to Use Wireless System - just 2 antennas in an SKB Rack in a Case
Regular price From $ 9,999.00