DISTRO9 distributes diversity RF and DC power across 9 wireless microphone receivers of any brand. A true “distribution amplifier,” DISTRO9 splits signals from two antennas (or one Diversity Fin) connected to the rear panel and amplifies them before delivering the signals to multiple receivers in a rack. An additional cascade port is included for daisy chaining multiple units together to accommodate up to 81 receivers per antenna pair.

The DISTRO9 HDR represents a unique approach to high quality RF signal distribution for wireless microphones. The DISTRO9 saves time and rack space by offering 9 outputs and inputs for 2 zones in just one rack space.  And each output is clean: DISTRO9 HDR employs low noise figure amplifiers and superior gain structure providing a high dynamic range over the spectrum.  The DISTRO9 HDR makes multi zone installations easy by providing two zone antenna inputs, this allows for coverage of large areas or multiple rooms and has DC power available for in-line amplifiers or active antennas.  Supplied Accessories

• RF and DC cables available separately

Specifications

• 2 Input Zones, each with 2x (Diversity) RF inputs provide maximum flexibility for covering large areas or multiple rooms, with DC power available for in-line amplifiers or active antennas. Any of the DISTRO9’s clean unity gain RF outputs can be cascaded to a second DISTRO9, eliminating the need for dedicated cascade ports and providing up to 17 wireless microphone channels in just 2RU of rack space.                  With superior gain flatness across VHF, T-Band, and UHF, the DISTRO9 HDR is built for the rapidly changing RF spectrum landscape worldwide.  NOTE:  DC bias from receivers MUST be switched OFF before connecting receivers to outputs.  Failure to turn DC bias OFF may result in damage to the device. The DC Power-to-Antenna output is factory-set to the ‘Off’ position.  To turn the Power-to-Antenna function ‘On’, the switch must be moved to the ‘On’ position.  However, access to this switch requires opening the DISTRO9 housing cover, which can involve the risk of electric shock; see WARNING below.        Specifications Frequency range .....................................50-1000 MHz (VHF, UHF, +900 bands) RF output level (gain) ................................................................................. ± 3dB Output connection isolation ..........................60dB @ 510MHz, 80dB @ 200 MHz Third order intercept point ........................................15dBm @ VHF, 20+ @ UHF Impedance ......................................................................................................50Ω Power Requirements ......................................................................50/60 HZ, 2A Fuse .................................................................................................T3.15A/250V Input AC voltage ..............................................................................100-240 VAC DC over coax (to external antennas) ...........................................12 VDC 100mA Output DC voltage (to receiver jacks) .......................................................12V 3A Output DC connectors ......................................................Anderson Power Pole Dimensions .............................................480(W) X 45(H) X 250(D) mm / 19(W) X 2(H) X 10(D)  in Unit Weight .......................................................................................2.7 Kg / 6lbs WARNING • DC bias MUST be switched OFF before connecting receivers to outputs.  Failure to turn DC bias OFF may result in damage to the device. • Do not expose this appliance to heat or moisture • To avoid shock, do not remove cover • Always plug the unit into a grounded receptacle • Refer all service to qualified service personnel or distributors. ©2021 RF Venue, Inc(800)795-0817 • orders@rfvenue.comwww.RFvenue.com      SKU DISTRO9HDR Includes: (1) DISTRO9 HDR Antenna Distribution System (1) AC power cordRetail RFVWA AADA ACTIVE ANTENNA DISTRIBUTION AMPLIFIER