We specialize in building Easily Transportable Wireless Systems For Theatre or Performance
NB: All Rack'D systems are built to order and take 2-3 weeks to complete ready for shipping
Our Rack'D FLY RACK 8 channel Audio-Technica 3000 series system is built around 8x audio-technica ATW3110 systems with receivers (1/2 width 1u rack) and transmitter bodypacks plus a high performance antenna distribution .system so that everything can be run from just 2 antennas and built into an SKB 3i-2317M146 Rack in a Rolling Case.
Our systems always cost less than the sum of the parts using Audio-Technica products throughout, but provide the same level of performance:
FLY RACK system uses our active Creative Audio CA.D29 dual 9 way (8 way plus cascade to link to another rack) antenna distribution system so the whole system runs on just 2 x 1/2 wave whip antennas, and bodymics Broadway BLF4 lavalier/hairline microphone elements. YOU CAN SELECT ALTERNATIVE MICROPHONE ELEMENTS INCLUDING THOSE FROM SHURE, COUNTRYMAN, DPA, AUDIO-TECHNICA, SENNHEISER ETC
Buy a full set of Audio-Technica items online for around $7900 including case.
If you purchased all the items including internal wiring, hardware etc it could cost around $8,500.00. Using our high quality alternatives for antenna distribution and microphone elements we are charging just $7800 - around $700 less plus the labor to unpack, assemble, test and ship.
We include the following:
-
- tailored length dc and antenna cabling for our TidyRack(TM) look - no more rats nests
- our premium XLR loom - 8 cables 10ft long
- assembly - put everything into the rack, cable it and test it
- order and gather all the necessary parts - say 1 hour
- unpack everything - say 1 hour
- assemble the BLX4R receivers - add rack ears/joiners - say 45 minutes
- unpack the SKB fly rack and prep for use - say 15 minutes
- bolt the ATW3100 receivers into rack - say 30 minutes
- mount the active antenna distributor and cable -say 10 minutes
- fit Antenna Panel - say 5 minutes
- connect the XLR looms to each receiver and anchor to rack - say 15 minutes
- connect power and antenna cables between units - say 15 minutes including lacing for neatness
- attach channel numbers to each receiver and each transmitter - say 10 minutes
- select 8x frequencies that will "play nice" together at your zip code - say 15 minutes
- program these frequencies into the receivers - say 10 minutes
- sync the transmitters to it's matching receiver - say 5 minutes
- connect the XLR outputs into a test sound system - say 3 minutes
- unpack the 10 microphones, connect each to a transmitter , and test that each microphone, transmitter and receiver works as specifies - say 30 minutes
- repack for shipping - say 30 minutes
- TOTAL TIME ABOUT 7 HOURS
- tailored length dc and antenna cabling for our TidyRack(TM) look - no more rats nests
NO WALL WARTS:
Our CA.D29 antenna distributor plugs directly into mains power!
Select:
OPTIONAL EARSET MICROPHONE TYPE:
BE4V: 3/16" Omni Easy Fit Sliding Boom Virtually Unbreakable Boom with Fixed Cable
BE4S: 3/16" Omni Countryman style with Fixed Cable
DEF3V: 1/10" "Grain of Rice" Omni - Easy Fit Sliding Boom Virtually Unbreakable Boom with Field Replaceable Cable
DEF3S: 1/10" "Grain of Rice" Omni - Countryman style with Field Replaceable Cable
BMRD BMSW BMRDSW BMRDSB - R-AT R-8ch R-FLY
Rack'D
(19) Rack'd Fly Case Audio-Technica AT3000 8 Channel Ready to Use Wireless System - just 2 antennas in an SKB Rack in a Case
- Regular price
- $ 8,500.00
- Sale price
- $ 7,499.00
We specialize in building Easily Transportable Wireless Systems For Theatre or Performance
NB: All Rack'D systems are built to order and take 2-3 weeks to complete ready for shipping
Our Rack'D FLY RACK 8 channel Audio-Technica 3000 series system is built around 8x audio-technica ATW3110 systems with receivers (1/2 width 1u rack) and transmitter bodypacks plus a high performance antenna distribution .system so that everything can be run from just 2 antennas and built into an SKB 3i-2317M146 Rack in a Rolling Case.
Our systems always cost less than the sum of the parts using Audio-Technica products throughout, but provide the same level of performance:
FLY RACK system uses our active Creative Audio CA.D29 dual 9 way (8 way plus cascade to link to another rack) antenna distribution system so the whole system runs on just 2 x 1/2 wave whip antennas, and bodymics Broadway BLF4 lavalier/hairline microphone elements. YOU CAN SELECT ALTERNATIVE MICROPHONE ELEMENTS INCLUDING THOSE FROM SHURE, COUNTRYMAN, DPA, AUDIO-TECHNICA, SENNHEISER ETC
Buy a full set of Audio-Technica items online for around $7900 including case.
If you purchased all the items including internal wiring, hardware etc it could cost around $8,500.00. Using our high quality alternatives for antenna distribution and microphone elements we are charging just $7800 - around $700 less plus the labor to unpack, assemble, test and ship.
We include the following:
-
- tailored length dc and antenna cabling for our TidyRack(TM) look - no more rats nests
- our premium XLR loom - 8 cables 10ft long
- assembly - put everything into the rack, cable it and test it
- order and gather all the necessary parts - say 1 hour
- unpack everything - say 1 hour
- assemble the BLX4R receivers - add rack ears/joiners - say 45 minutes
- unpack the SKB fly rack and prep for use - say 15 minutes
- bolt the ATW3100 receivers into rack - say 30 minutes
- mount the active antenna distributor and cable -say 10 minutes
- fit Antenna Panel - say 5 minutes
- connect the XLR looms to each receiver and anchor to rack - say 15 minutes
- connect power and antenna cables between units - say 15 minutes including lacing for neatness
- attach channel numbers to each receiver and each transmitter - say 10 minutes
- select 8x frequencies that will "play nice" together at your zip code - say 15 minutes
- program these frequencies into the receivers - say 10 minutes
- sync the transmitters to it's matching receiver - say 5 minutes
- connect the XLR outputs into a test sound system - say 3 minutes
- unpack the 10 microphones, connect each to a transmitter , and test that each microphone, transmitter and receiver works as specifies - say 30 minutes
- repack for shipping - say 30 minutes
- TOTAL TIME ABOUT 7 HOURS
- tailored length dc and antenna cabling for our TidyRack(TM) look - no more rats nests
NO WALL WARTS:
Our CA.D29 antenna distributor plugs directly into mains power!
Select:
OPTIONAL EARSET MICROPHONE TYPE:
BE4V: 3/16" Omni Easy Fit Sliding Boom Virtually Unbreakable Boom with Fixed Cable
BE4S: 3/16" Omni Countryman style with Fixed Cable
DEF3V: 1/10" "Grain of Rice" Omni - Easy Fit Sliding Boom Virtually Unbreakable Boom with Field Replaceable Cable
DEF3S: 1/10" "Grain of Rice" Omni - Countryman style with Field Replaceable Cable
BMRD BMSW BMRDSW BMRDSB - R-AT R-8ch R-FLY
- Regular price
- $ 8,500.00
- Sale price
- $ 7,499.00
Frequently Bought Together
-
Vendor: HOLLYLAND
(H82) C1-Pro-xS - 3, 4, 6 or 8 Station Pro Wireless Full Duplex Intercom Systems
Regular price From $ 979.00 -
Vendor: HOLLYLAND
(H82) C1-xS - 2, 3, 4, 6 or 8 Station Wireless Full Duplex Intercom Systems
Regular price From $ 499.00 -
Vendor: Shure
(C81) Shure SLXD4 1/2 width Receiver - select band -
Sale price $ 449.00Regular price $ 599.00 -
Vendor: Shure
(C21) Shure SLXD24 Digital over UHF Handheld Transmitter and Receiver - select band
Sale price From $ 699.00Regular price $ 1,599.00