We specialize in building Easily Transportable Wireless Systems For Theatre or Performance

NB: All Rack'D systems are built to order and take 2-3 weeks to complete ready for shipping

Our Rack'D FLY CASE 8 channel BLX system is built around 8xBLX14R systems with receivers (1/2 width 1u rack) and transmitter bodypacks plus a high performance antenna distribution .system so that everything can be run from just 2 antennas and built into an SKB 3i-2317M146 6U Rack in a Rolling Case.

 

Our systems always cost less than the sum of the parts using Shure products throughout, but provide the same level of performance:

Our system uses our active Creative Audio CA.D25 dual  5 way(5 way plus cascade out to link to anther rack) antenna  distribution system so the whole system runs on just 2 x 1/2 wave whip antennas.

We include 10 bodymics brand Broadway BLF4 lavalier/hairline microphone elements (yep 2 spares, cause we know one will be wrecked at the worst possible time - you can upgrade to other mic types.

EQUIVALENT PARTS LIST:

 

OTHER PARTS WE INCLUDE:

Internet cost of major components - receivers, transmitters, mics, antenna distros and case is a little over $7,899.00

If you purchased all the items including internal wiring, hardware etc it could cost around $$8,800, but we are charging just $6,499 ready to use- around $1,400 less than cost of major items plus the labor to unpack, assemble, test and ship, and then we include the following:

  • tailored length dc and antenna cabling for our TidyRack(TM) look - no more rats nests 
  • assembly - put everything into the rack, cable it and test it 
    • order and gather all the necessary parts 
    • unpack everything 
    • assemble the SLX4D4 receivers - add rack ears/joiners
    • unpack the SKB fly rack and prep for use 
    • bolt the BLX4R receivers into rack
    • mount the active antenna distributor and cable
    • fit Antenna Panel
    • connect the XLR looms to each receiver and anchor to rack 
    • connect power and antenna cables between units 
    • attach channel numbers to each receiver and each transmitter
    • select 8x frequencies that will "play nice" together at your zip code
    • program these frequencies into the receivers
    • sync the transmitters to it's matching receiver 
    • connect the XLR outputs into a test sound system 
    • unpack the 10 microphones, connect each to a transmitter , and test that each microphone, transmitter and receiver works as specifies 
    • repack for shipping 

 

BMRD BMSW BMRDSW BMRDSB

Rack'D

(C41) .8ch Rack'd Fly Shure BLX 8 Channel Ready to Use Wireless System - just 2 antennas in an SKB Rack in a Case

SKU R-FLY8-BLX-BL
$ 7,492.00
$ 6,499.00

We specialize in building Easily Transportable Wireless Systems For Theatre or Performance

NB: All Rack'D systems are built to order and take 2-3 weeks to complete ready for shipping

Our Rack'D FLY CASE 8 channel BLX system is built around 8xBLX14R systems with receivers (1/2 width 1u rack) and transmitter bodypacks plus a high performance antenna distribution .system so that everything can be run from just 2 antennas and built into an SKB 3i-2317M146 6U Rack in a Rolling Case.

 

Our systems always cost less than the sum of the parts using Shure products throughout, but provide the same level of performance:

Our system uses our active Creative Audio CA.D25 dual  5 way(5 way plus cascade out to link to anther rack) antenna  distribution system so the whole system runs on just 2 x 1/2 wave whip antennas.

We include 10 bodymics brand Broadway BLF4 lavalier/hairline microphone elements (yep 2 spares, cause we know one will be wrecked at the worst possible time - you can upgrade to other mic types.

EQUIVALENT PARTS LIST:

 

OTHER PARTS WE INCLUDE:

Internet cost of major components - receivers, transmitters, mics, antenna distros and case is a little over $7,899.00

If you purchased all the items including internal wiring, hardware etc it could cost around $$8,800, but we are charging just $6,499 ready to use- around $1,400 less than cost of major items plus the labor to unpack, assemble, test and ship, and then we include the following:

  • tailored length dc and antenna cabling for our TidyRack(TM) look - no more rats nests 
  • assembly - put everything into the rack, cable it and test it 
    • order and gather all the necessary parts 
    • unpack everything 
    • assemble the SLX4D4 receivers - add rack ears/joiners
    • unpack the SKB fly rack and prep for use 
    • bolt the BLX4R receivers into rack
    • mount the active antenna distributor and cable
    • fit Antenna Panel
    • connect the XLR looms to each receiver and anchor to rack 
    • connect power and antenna cables between units 
    • attach channel numbers to each receiver and each transmitter
    • select 8x frequencies that will "play nice" together at your zip code
    • program these frequencies into the receivers
    • sync the transmitters to it's matching receiver 
    • connect the XLR outputs into a test sound system 
    • unpack the 10 microphones, connect each to a transmitter , and test that each microphone, transmitter and receiver works as specifies 
    • repack for shipping 

 

BMRD BMSW BMRDSW BMRDSB
$ 7,492.00
$ 6,499.00
Mic Package:

Frequently Bought Together

Total price $ 38,045.00

Product Description

We specialize in building Easily Transportable Wireless Systems For Theatre or Performance

NB: All Rack'D systems are built to order and take 2-3 weeks to complete ready for shipping

Our Rack'D FLY CASE 8 channel BLX system is built around 8xBLX14R systems with receivers (1/2 width 1u rack) and transmitter bodypacks plus a high performance antenna distribution .system so that everything can be run from just 2 antennas and built into an SKB 3i-2317M146 6U Rack in a Rolling Case.

 

Our systems always cost less than the sum of the parts using Shure products throughout, but provide the same level of performance:

Our system uses our active Creative Audio CA.D25 dual  5 way(5 way plus cascade out to link to anther rack) antenna  distribution system so the whole system runs on just 2 x 1/2 wave whip antennas.

We include 10 bodymics brand Broadway BLF4 lavalier/hairline microphone elements (yep 2 spares, cause we know one will be wrecked at the worst possible time - you can upgrade to other mic types.

EQUIVALENT PARTS LIST:

 

OTHER PARTS WE INCLUDE:

Internet cost of major components - receivers, transmitters, mics, antenna distros and case is a little over $7,899.00

If you purchased all the items including internal wiring, hardware etc it could cost around $$8,800, but we are charging just $6,499 ready to use- around $1,400 less than cost of major items plus the labor to unpack, assemble, test and ship, and then we include the following:

  • tailored length dc and antenna cabling for our TidyRack(TM) look - no more rats nests 
  • assembly - put everything into the rack, cable it and test it 
    • order and gather all the necessary parts 
    • unpack everything 
    • assemble the SLX4D4 receivers - add rack ears/joiners
    • unpack the SKB fly rack and prep for use 
    • bolt the BLX4R receivers into rack
    • mount the active antenna distributor and cable
    • fit Antenna Panel
    • connect the XLR looms to each receiver and anchor to rack 
    • connect power and antenna cables between units 
    • attach channel numbers to each receiver and each transmitter
    • select 8x frequencies that will "play nice" together at your zip code
    • program these frequencies into the receivers
    • sync the transmitters to it's matching receiver 
    • connect the XLR outputs into a test sound system 
    • unpack the 10 microphones, connect each to a transmitter , and test that each microphone, transmitter and receiver works as specifies 
    • repack for shipping 

 

BMRD BMSW BMRDSW BMRDSB

Customer Reviews
Add review

Similar Products

Customers also bought

    Complementary products